Oxbo - CP100

Sweet corn picked by the CP100 and CP400 have the same quality as if they were picked by hand. All outer leafs stay intact which will therefore not be damaged. The ears are gently stripped from the stalks and conveyed on soft rubber conveyor belts.

The Pixall CP100, is a one row pulled harvester, which can harvest up to about 1 hectare a day. Delivering high quality, clean, "hand-picked" quality sweet corn while saving on labor.

Request information

Specifications

Dimensions:
Height: 25c9m (102in)
Length: 881cm (347in)
Shipping Length: 569cm (224in)
Width: 236cm (93in)
Weight: 1.678kg (approx 3,700lbs)
Track: 185,4cm (73in)

Hitch
Clevis type with 4 position adjustable offset tongue

Rows
One picking row; 61cm or greater (24in) row spacing

Cleaning System
Cleaning includes one 68.5cm (24in) diameter fan and mechanical drive.

Conveyor
Intake conveyor: 46cm (18in) wide rubberized belt chain with ¼in (3,2cm) cleats.
Center conveyor: 46cm (18in) chain and sprocket
Elevator conveyor: 46cm (18in) wide rubber with 7,6cm D.R. (32in) cleats.

Cutter Blades
One circular blade with 8 sections driven by hydraulic motor.

Grip Belts
Two belts, each driven by a hydraulic motor, spacing adjustable.

Head Flotation
Method: The gauge wheel senses changes in ground contour and is
adjustable to control the cutting height by adjusting hydraulic cylinder.
Float: two coil springs reduce the weight on the gauge wheel. The hydraulic cylinder raises the gauge wheel.
Control: spring tension can be adjust.

Tires
27,2 x 77,7cm (10.7 x 30.6in)

Gauge Wheel
Size: 27.9 x 38.1cm (11x15 in)
Function: senses change in ground contour and adjusts head cutting height accordingly.

Height Control
Header height is controlled by a hydraulic cylinder from the tractor and can raise the gauge wheel off the ground for transport.

Capacity (Approx)
Harvesting Speed: 3.2-4.8kph (2 to 3 mph)
Ears/Hour: Up to 600 dozen per hour

Elevator
Overall Length: 3.65m (12ft)
Width: 46cm (18in)

Hydraulic System
Four hoses with 2.54cm (½in) ORB male thread. One low pressure PTO driven hydraulic pump with filter. 25.5L (27qt) hydraulic reservoir.

Tractor Required
40hp minimum (30kw); 35mm-6 spline 540rpm power take off (PTO); two auxiliary hydraulic circuits needed to power cutter height and head lift cylinders; stationary drawbar.

Contact us for more information by clicking the "Request information" link above. You can also give us a call at: +31 (0) 165 315 536.

Request information

Company
Title
First name
Lastname
Phone
E-mail*
Notes
 
Sweere / Sweere Food Processing B.V.
Standdaarbuitensedijk 1A
4751 SG Oud Gastel
The Netherlands

Office: (+31) (0) 165 315 536
Mobile office: (+31) (0) 6 2042 9842
Service: (+31) (0) 165 316 024
Mobile service: (+31) (0) 6 1097 2594
Contact us
Copyright © 2017 | About us | Contact | info@sweere.net | T: +31 (0) 165 315 536 | F: +31 (0) 165 310 246